Push-to-talk, Speed dial 100, Speed dial 8 – Polycom SoundPoint IP 500 User Manual
Page 12
Polycom IP 500/501 User Guide
VoicePipe Communications
IP 500/501 User Guide
Page 12 of 13
Extended Functionality
1.
GO OFF HOOK
2.
Press
*07
.
Push-to-Talk
Provides intercom-like functionality. This feature allows a user to dial another station where the system will request
the destination station to automatically answer. For this feature to work (called station automatically answers via the
speakerphone), the called station must support an enhanced calling protocol. The calling station must also be in the
called party’s Push-to-Talk allowed access list.
Using the Feature
Activate: Using the Feature Code
1.
Pick up
HANDSET
, press the
NEWCALL
soft key, or press the
SPEAKERPHONE KEY
.
2.
Dial
*50
.
You will hear a stuttered dial tone then a normal dial tone.
3.
Dial the extension of the phone you want to intercom.
Extended Functionality
Program a Speed Dial 8 number to quickly place an intercom call.
Speed Dial 100
Allow a user to use a feature code and 2 digits to complete a call.
Using the Feature
Configure
1.
GO OFF HOOK
.
2.
Press
*75
. You will hear a stuttered dial tone then a normal dial tone.
3.
Using the
KEYPAD
Enter the Speed Dial 100 Code
00-99
plus the
NUMBER
you want to associate
with it and then press the
#
key.
4.
The
IVR
will notify you whether or not the programming was successful.
Use
1.
GO OFF HOOK
.
2.
Press
*3
3.
Press the Speed Dial 100 Codes
00-99
.
Speed Dial 8
Allow a user to hit only one button to complete a call.
Using the Feature
Configure
1. GO OFF HOOK
.
2.
Press
*74
. You will hear a stuttered dial tone then a normal dial tone.