Hold, Last number redial – Polycom SoundPoint IP 500 User Manual
Page 11
Polycom IP 500/501 User Guide
VoicePipe Communications
IP 500/501 User Guide
Page 11 of 13
2.
Using the
DISPLAY CONTROL
keys, select the individual
LINE
that you want to place in Do Not
Disturb mode and then press the
SELECT
soft key, or press the
SET ALL
soft key to select all lines.
3.
Press the
ENABLE
soft key.
†
If the phone number is shared on another phone, enabling Do Not Disturb on the phone will simply turn on silent ring and
does not make it busy. Calls may still be answered on any phone sharing the phone number.
Depending on how the phone was provisioned, pressing the Do Not Disturb button will either automatically place all line
appearances into Do Not Disturb, or you may be prompted for which lines to place on Do Not Disturb.
Deactivate: Using the Phone’s Keys
1.
Press the
DO NOT DISTURB
button.
2.
Using the
DISPLAY CONTROL
keys, select the
LINE
to remove from Do Not Disturb mode and
press the
SELECT
soft key, or press the
CLEAR ALL
soft key to remove from all lines.
3.
Press the
DISABLE
soft key.
Activate: Using the Feature Code
1.
GO OFF HOOK
2.
Press
*03
Deactivate: Using the Feature Code
1.
GO OFF HOOK
2.
Press
*04
Hold
Allows user to place a call on hold and retrieve it.
Using the Feature
Activate: Using the Soft Keys
†
1.
Press the
HOLD
soft key.
Deactivate: Using the Soft Keys
†
1.
Press the
RESUME
soft key.
†
If the phone number is shared on another phone, you can put a call on-hold and take the call off-hold at the other phone that is
sharing the phone number.
Extended Functionality
The user can use the
HOLD
button on the phone to toggle a call on and off hold.
Last Number Redial
Allow the user to redial the last number dialed with a feature code or a button.
Using the Feature
1.
Press the
REDIAL
Feature Key.