Polycom SoundPoint IP 500 - Manual (Page 10)

Polycom IP 500/501 User Guide
VoicePipe Communications
IP 500/501 User Guide Page 10 of 13
Caller ID Blocking Per Call
Allow users to block their caller ID on a call-by-call basis.
Using the Feature
1. GO OFF HOOK .
2.
Press
*67 . You will hear a stutter dial tone then a normal dial tone.
3.
Dial the
NUMBER of the party you wish to call.
Caller ID Delivery Per Call
Allow users to deliver their caller ID on a call-by-call basis when they have turned on the Caller ID Blocking feature
within the VoicePipe Web Portal.
Using the Feature
4. GO OFF HOOK .
5.
Press
*65 . You will hear a stutter dial tone then a normal dial tone.
6.
Dial the
NUMBER of the party you wish to call.
Dialing
Allow a user to make a call.
Using the Feature
Placing a Call
1.
Pick up
HANDSET , press the NEWCALL soft key, or press the SPEAKERPHONE KEY .
2.
Enter the number you wish to call.
3.
Press the
SEND soft key, or wait to connect.
Extended Functionality
Placing a Call
1.
Dial the
NUMBER you wish to call using the KEYPAD .
2.
Press the
DIAL soft key.
Do Not Disturb
Allow users to set their station as unavailable so that incoming calls are given a busy treatment. Depending on how
the user has set up their busy treatment, the callers will be directed to voicemail or forwarded to another line.
NOTE: The user must use the same method to turn the function off that they used to turn the function on.
Otherwise, the system will not recognize the ‘off’ command.
Using the Feature
Activate: Using the Phone’s Keys †
1.
Press the
DO NOT DISTURB button.