Philips DVDR3597H - Manual (Page 79)

English
79
System Menu Options
(continued)
Video Output settings
(underlined options are the factory default settings)
The picture shape can be adjusted to fi t your TV.
{ 4:3 Letterbox } – For a ‘wide-screen’ display with
black bars on the top and bottom.
{ 4:3 Panscan } – For a full-height picture with the
sides trimmed.
{ 16:9 Widescreen } – For wide-screen TV
(frame ratio 16:9).
Select the type of video output that matches the video
connection between this recorder and your TV.
{ SCART (RGB) } – For SCART connection.
{ HDMI output } – For HDMI connection.
Note: Video output setting is not required for S-Video or
Composite (CVBS) video connection.
This feature is only applicable for HDMI connection.
{ Auto }
– Automatically select the best supported
video resolution.
{ Native } – Follow the native video resolution.
{ Manual } – Select a suitable video resolution depending
on the capability of the connected TV/
device to further enhance the HDMI video
output (480p/576p, 720p 50/60Hz, 1080i
50/60Hz, 1080p 50/60Hz). ‘i’ denotes
interlace and ‘p’ denotes progressive.
Adapt the colour dynamic for NTSC disc.
{ Normal }
– Normal colour contrast.
{ Enhanced } – Improve the colour contrast and brightens
the picture of an NTSC-compatible DVD.
This feature is only available in progressive scan mode.
Use keys to adjust the vertical position of the picture on
your TV screen, press OK to confi rm the setting.
TV shape
Active video output
HDMI
Black level
Vertical