Philips DVDR3597H - Manual (Page 17)

English
17
Step 1: Basic Recorder Connections
(continued)
Connecting the video/audio
cables
This connection enables you to view the
playback from this recorder. You only
need to choose one of the options
below to make your video connection.
– For a standard TV, follow option 1, 2
or 3.
– For a HDMI TV, follow option 4.
Helpful Hint:
– Audio connection is only required if you
are connecting this recorder to your TV using
the S-VIDEO or CVBS socket.
Option 1: Using the Scart socket
Connect a scart cable (supplied) from the
EXT1-TO TV socket on the recorder
to the corresponding SCART socket on
the TV.
Helpful Hint:
– Use the EXT2- TO VCR/SAT socket for
connecting the recorder to additional device.
Option 2: Using the S-Video socket
A Connect a S-video cable (not supplied)
from the S-VIDEO OUT socket on the
recorder to the S-Video input socket
(usually labelled as Y/C or S-VHS) on the
TV.
B Connect the audio cables (not supplied)
from the AUDIO OUT sockets on the
recorder to the audio input sockets on
the TV.
Option 3: Using the Video (CVBS)
socket
A Connect a composite video cable (yellow
- not supplied) from the CVBS OUT
socket on the recorder to the video
input socket (usually labelled as A/V In,
Video In, Composite or Baseband) on the
TV.
B Connect the audio cables (not supplied)
from the AUDIO OUT sockets on the
recorder to the audio input sockets on
the TV.
ANTENNA-IN TV-OUT
TO TV EXT 1 TO VCR/SAT EXT 2
HDMI
OUT
AUDIO O
AUDI
L
TV
Option 1
TO VCR/SAT XT 2
HDMI
OUT
CVBS OUT
S-VIDEO OUT
VIDEO OUT COAXIAL
DIGITAL OUT AUDIO OUT
AUDIO
R L
TV
Option 2
Option 3
OR