Philips DVDR3597H - Manual (Page 18)

English
18
Step 1: Basic Recorder Connections
(continued)
Option 4: Connecting to a HDMI-
compatible TV
HDMI (High Defi nition Multimedia
Interface) is a digital interface that allows
pure digital video/audio transmission
without the loss of image quality.
Connect a HDMI cable (not supplied)
from the HDMI OUT on the main unit
to the HDMI IN on a HDMI-compatible
device (e.g., HDMI TV, HDCP compliant
DVI TV).
Helpful Hints:
– Some HDMI TVs/monitors from different
manufacturers may adhere to different
standards resulting in unreliable signal
transfers.
– The HDMI connector is only compatible
with HDMI compliant devices and DVI-TVs.
– The teletext information will not be
accessible in the recorder’s live TV mode.
Note:
To enable HDMI connection, you must
set the recorder’s video output correctly.
A Make an addition video connection from
this recorder to your TV using Scart,
S-Video or Video (CVBS).
B Turn on your TV to the correct viewing
channel for the above video connection.
C When you have completed the
installation and set-up, change the video
output setting of this recorder as
follows:.
1) Press OPTIONS.
2) Move to { Settings } > { Video
output } > { Active video output }
> { HDMI output }, then press OK
to confi rm.
D Switch your TV to the correct viewing
channel for the HDMI connection (refer
to your TVs user manual).
Option 4
ANTENNA-IN TV-OUT
TO TV EXT 1 TO VCR/SAT EXT 2
MA
HDMI
OUT
CVBS OUT
S-VIDEO OUT
VIDEO OUT COAXIAL
DIGITAL OUT AUDIO OUT
AUDIO
R L
TV