Adjusting loudness, Front image enhancer (f.i.e.), Audio adjustments – Pioneer Super Tuner III D DEH-P2550 User Manual

Page 24

1 Press AUDIO and hold until frequency

and the Q factor (e.g., F- 80 Q 1W) appears

in the display.

2 Press AUDIO to select the desired band

for adjustment.

LowMidHigh

3 Press c or d to select the desired fre-

quency.

Press c or d until the desired frequency ap-

pears in the display.

Low: 4080100160 (Hz)

Mid: 2005001k2k (Hz)

High: 3k8k10k12k (Hz)

4 Press a or b to select the desired Q fac-

tor.

Press a or b until the desired Q factor ap-

pears in the display.

2N1N1W2W

Note

If you make adjustments when a curve other than
CUSTOM is selected, the newly adjusted curve
will replace the previous curve. Then a new curve
with CUSTOM appears on the display while se-
lecting the equalizer curve.

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

1 Press AUDIO to select LOUD.

Press AUDIO until LOUD appears in the dis-

play.

2 Press a to turn loudness on.

Loudness level (e.g., LOUD MID) appears in

the display.

3 Press c or d to select a desired level.

Each press of c or d selects level in the fol-

lowing order:

LOW (low)MID (mid)HI (high)

4 Press b to turn loudness off.

LOUD :OFF appears in the display.

Note

You can also turn loudness on or off by pressing
LOUDNESS.

Front image enhancer (F.I.E.)

The F.I.E. (Front Image Enhancer) function is a

simple method of enhancing front imaging by

cutting mid- and high-range frequency output

from the rear speakers, limiting their output to

low-range frequencies. You can select the fre-

quency you want to cut.

Precaution

When the F.I.E. function is deactivated, the rear
speakers output sound of all frequencies, not just
bass sounds. Reduce the volume before disenga-
ging F.I.E. to prevent a sudden increase in vo-
lume.

1 Press AUDIO to select FIE.

Press AUDIO until FIE appears in the display.

2 Press a to turn F.I.E. on.

# To turn F.I.E. off, press b.

3 Press c or d to select a desired fre-

quency.

Each press of c or d selects frequency in the

following order:

100160250 (Hz)

Audio Adjustments

Section

HHHHHHHHHHHHHH