Built-in cd player playing a cd 12, Playing a cd, Built-in cd player – Pioneer Super Tuner III D DEH-P2550 User Manual

Page 12

Playing a CD

These are the basic steps necessary to play a

CD with your built-in CD player. More ad-

vanced CD operation is explained starting on

the next page.

1 Play time indicator

Shows the elapsed playing time of the cur-

rent track.

2 Track number indicator

Shows the track currently playing.

1 Press OPEN to open the front panel.

CD loading slot appears.

# After a CD has been inserted, press SOURCE
to select the built-in CD player.

2 Insert a CD into the CD loading slot.

Playback will automatically start.

CD loading slot

EJECT button

# You can eject a CD by pressing EJECT.
# To avoid a malfunction, make sure that no
metal object comes into contact with the term-
inals when the front panel is open.

3 Close the front panel.

4 Use VOLUME to adjust the sound level.

Press to increase or decrease the volume.

5 To performfast forward or reverse,

press and hold c or d.

6 To skip back or forward to another

track, press c or d.

Pressing d skips to the start of the next track.

Pressing c once skips to the start of the cur-

rent track. Pressing again will skip to the pre-

vious track.

Notes

! The built-in CD player plays one, standard, 12-

cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.

! Do not insert anything other than a CD into

the CD loading slot.

! If you cannot insert a disc completely or if

after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting the disc
again.

! If the built-in CD player does not operate prop-

erly, an error message such as ERROR-11
may be displayed. Refer to Understanding
built-in CD player error messages on page
29.

Built-in CD Player

Section

HHHHHHHHHHHHHH