Philips CAM150 - Manual (Page 18)

18
During video capture, do not move the •
camcorder too fast.
Use a tripod (not supplied) if necessary.
•
Why do my video/pictures look distorted on a
TV screen?
Select the correct TV system. •
How do I charge the camcorder?
You can charge the camcorder via •
the supported USB cable. When you
connect it to your PC/laptop it will
automatically charge. You can also connect
the camcorder to a USB charger via the
supplied USB cable.
How long do I have to charge the camcorder?
The camcorder is fully charged for first •
usage. The camcorder charge time when
connected to your PC/laptop is 3 hours.
When you charge it via USB adaptor, the
charge time is 2 hours.
Where can I find an adaptor for CAM150 to
charge the battery?
CAM150 can be charged via regular •
USB adaptors, which are readily available
in electronic stores. CAM150 is also
compatible with iPhone adaptors.
How do I fast-forward or rewind on the
camcorder?
You can fast-forward during play of a •
movie by pressing the right-button for 2
seconds. You can rewind during play of a
movie by pressing the left-button for 2
seconds.
Camcorder stopped responding?
In the unlikely event that your camcorder •
stops responding, you can manually reset
it. The reset button is located under the
protective cover. There you see a small
opening beside the USB socket. Please use
a small prying object (like a pen) to insert
and press gently for resetting. After you
have reset the camcorder, please turn on
the camcorder again, and set-up will start
again.
7 Frequently
asked questions
(FAQ)
Why is there no response when I use the
camcorder?
The camcorder is in power-off mode. Turn •
on the camcorder (see ‘Get started’ >
‘Turn on’).
The built-in battery may be drained.
•
Charge the battery (see ‘Get started’ >
‘Charge the built-in battery’).
Why is [Memory full!] displayed when I try to
record?
Ensure that the Micro SD card has been •
inserted correctly (see ‘Get started’ >
‘Load the Micro SD card’).
The memory is used up. Save your video/
•
pictures to a computer (see ‘Use more of
your camcorder’ > ‘Transfer video/pictures
to a PC/Mac’). Then delete files from your
camcorder or clear the memory.
How much memory is needed for 1 hour of
Full HD recording?
The CAM150 uses 4GB on average for •
1 hour of Full HD video. For a more
complex video recording (e.g. with lots of
motions in the video, or a lot of panning),
the CAM150 will use more memory. This is
done to maintain the video quality, but will
increase the usage of memory.
Why do I have no access to folders on the
camcorder from my computer?
Ensure that the USB connection is correct. •
The camcorder turns off automatically •
15 minutes after it is connected to a
computer. You can press
to turn it on
again.
Why do my video/pictures look blurry?
Hold the camcorder steady in your hands •
during shooting.
EN