Pitco Frialator RSCPE14 - Manual (Page 8)

INSTALLATION
4
1) Probe
2) High Temperature Limit (may be either style)
3) Heating Element
1.6. VENTILATION AND FIRE SAFETY SYSTEMS
Your new appliance must have proper ventilation to function safely and properly. It is very important
to install a fire safety system. Your ventilation system should be designed to allow for easy cleaning.
Frequent cleaning and proper maintenance of the ventilation system and the appliance will reduce the
chances of fire. Ventilation and fire safety systems must comply to local and national codes. Refer to
ANSI 83.11 for a list of reference documents that will provide guidance on ventilation and fire safety
systems.
1.7. INSPECTION
Before you begin filling and operating the appliance, perform the following visual checks:
9 After the appliance is in its
permanent location, check the
levelness.
9 Ensure that the probe, heating
element and high temperature
limit is in place and secure.
Check the high limit bulb
mounting screws to ensure
that they are tight.
9 Review the installation portion
of this manual and ensure that
all steps have been followed
and executed properly.
To Access Electrical Connections
5/16 Wrench Required
1) 1” (2.54cm) Access Hole
2) Connection Points
1/2” (1.27cm) Allen Wrench Required
3) Ground Connection
Flat head screwdriver required