Panasonic AJ-SDd93 - Manual (Page 32)

– 32 –
13
10
Setup menus (continued)
USER menu
The underlined items indicates the initial setting.
No./Item Description
802
TELETEXT
SEL
(For AJ-SD93P)
For selecting the type of teletext
signals to be recorded.
0000 MOJI : MOJI system
0001 NABTS : NABTS system
Note:
Signals like VITC signals are often
mistakenly detected as teletext signals
when the NABTS system has been
selected.
If this happens, select MANU as the setting
for setup menu No. 803 (TELETEXT DET),
then select the line for teletext signals.
803
TELETEXT
DET
For selecting the method used to
detect the lines in which the teletext
signals are to be recorded.
0000 OFF:
The teletext signals are not recorded.
0001 AUTO :
The teletext signals are automatically
detected
0002 MANU :
The lines in which the teletext signals
are to be recorded are selected and set.
Notes:
• The number of lines in which the teletext
signals can be recorded differs depending
on the setup menu item No.660 (UMID
REC) setting. (See “Number of lines which
can be set for teletext”.)
• When setting “MANU” is selected and the
STOP button is pressed, operation
transfers to the sub-screen, and the
number of recording lines can be
selected.
To return from the sub-screen, press the
STOP button again.
(For AJ-SD93P)
00
REC LINE1
:
12
REC LINE13
(For AJ-SD93E)
00
REC LINE1
:
14
REC LINE15
For selecting the lines in which the
teletext signals are to be recorded.
(For AJ-SD93E)
0000 OFF
0001 7&320
0002 8&321
0003 9&322
0004 10&323
0005 11&324
0006 12&325
0007 13&326
0008 14&327
0009 15&328
0010 16&329
0011 17&330
0012 18&331
0013 19&332
0014 20&333
0015 21&334
0016
22
(For AJ-SD93P)
0000 OFF
0002 11&274
0003 12&275
0004 13&276
0005 14&277
0006 15&278
0007 16&279
0008 17&280
0009 18&281
0010 19&282
0011 20&283
0012 21&284
0013
22
Sub-screen
No./Item Description
804
BLANK LINE
This turns the blanking ON or OFF
in the vertical blanking period of the
video output signals.
0000 BLANK :
Blanking is effected forcibly for all
lines.
0001 THRU :
No blanking is effected for any of
the lines.
0002 MANU :
Blanking ON or OFF is selected for
each line.
Note:
When setting “MANU” is selected and
the STOP button is pressed, operation
transfers to the sub-screen, and ON or
OFF can be selected for each line. To
return from the sub-screen, press the
STOP button again.
Sub-screen
(For AJ-SD93P)
00
LINE 10&273
:
11
LINE 21&284
(For AJ-SD93E)
00
LINE 7&320
:
15
LINE 22&335
0000 BLANK :
Blanking is forcibly effected.
0001 THRU :
No blanking is effected.
• Number of lines which can be set for teletext
•The teletext signals which are played back do not satisfy
the ITU-R BT.653 teletext standard perfectly.
No.660:
UMID REC
setting
Number of lines which can be set
R e c o r d / p l a y b a c k
format,
50 Mbps
OFF
ON
10
9
R e c o r d / p l a y b a c k
format,
25 Mbps
YA93P
YA94G
YA93P
YA94G
YA94G
This appears only when the optional board
AJ-YA93P has been installed.
This appears only when the optional board
AJ-YA94G has been installed. YA93P
For AJ-SD93P:
14
12
No.660:
UMID REC
setting
Number of lines which can be set
R e c o r d / p l a y b a c k
format,
50 Mbps
OFF
ON
15
12
R e c o r d / p l a y b a c k
format,
25 Mbps
For AJ-SD93E: