Philips 37-42PF9831D/10 - Manual (Page 35)

This allows you to upgrade your TV software using a USB
device.
USB device upgrade
It is possible to initiate an upgrade procedure from a USB
device before you start up the TV.The memory device must
be filled with the appropriate upgrade image (and structure)
which can be found on the www. philips.com/support
website.
How to upload a new software version on your memory
device, see Annex 1, Philips TV software upgrade with
portable memory, p. 60.
Automatic software announcement (if present)
When you switch on your TV a message may appear that a
new software upgrade is available.
< Press the red colour key on the remote control if you want
to be reminded later on.
< Press the green colour key on the remote control to
confirm you have read the message.
>
Once you have confirmed, the message will not pop up
again.
If however, you want to see the last broadcasted
announcement again, select Announcement in the
Software upgrade menu.
How to upgrade the TV software EN
35
Info
TV menu
Installation Software upgrade
Current softw. info
Local upgrades
Announcement
.............
Channels
Manual network i..
Preferences
Connections
Decoder
Factory settings
Software upgrade
Note: as long as the software upgrade has not been
executed, the message will be available.
2504.4 en 13-12-2006 08:29 Pagina 35