Polaris 9922462 - Manual (Page 57)

54
MAINTENANCE
Engine Oil
Oil Recommendations
Always change the oil filter whenever changing oil.
Polaris recommends the use of Polaris PS-4 PLUS Performance Syn-
thetic 2W-50 4-cycle oil or a similar oil for this engine. Oil may need to
be changed more frequently if Polaris oil is not used. Always use 2W-50
oil. Follow the manufacturer's recommendations for ambient tempera-
ture operation. See page 97 for the part numbers of Polaris products.
Mixing brands or using a non-recommended oil may cause serious engine
damage. Always use the recommended oil. Never substitute or mix oil brands.
Oil Specifications
Oil Level
The oil dipstick is located on the left side of the vehicle.
1. Position the vehicle on a
level surface. Place the
transmission in neutral.
Lock the parking brake.
2. Start the engine. Allow it to
idle for 30 seconds. Stop
the engine.
3. Remove the dipstick. Wipe it dry with a clean cloth.
4. Reinstall the dipstick completely.
5. Remove the dipstick and check the oil level. Add oil as needed.
Maintain the oil level in the safe range. Do not overfill.
6. Reinstall the dipstick.
Lubricant Capacity Drain Plug Torque
PS-4 PLUS Performance
Synthetic 2W-50 4-Cycle Oil
1.9 qts. (1.8 l) (with oil cooler)
1.7 qts. (1.6 l) (oil change only)
14 ft. lbs. (19 Nm)
{
Safe Range