Plinius Audio TIKI Network Audio Player - Manual (Page 13)

11 NETWORK AUDIO PLAYER
Product Features
MAINS/LINE FUSE
A Mains/Line fuse is fitted within the IEC socket on the rear of the power supply pack.
A small drawer at the bottom of this socket may be removed (after the IEC plug is
removed) by levering it out with a flat blade screwdriver. The fuse fitted should be
rated at no greater than that specified on the rear panel.
IMPORTANT: DO NOT FIT A FUSE WITH A HIGHER RATING.
NOTE: Fuse failure may indicate a severe problem. Should the network audio player
continue to exhibit mains fuse failure contact your Plinius dealer.
Playback Control
The Plinius Tiki Network Audio Player is designed to be operated with the Plinius
Arataki, however it can also be operated by other DLNA compatible media controllers.
Media controllers such as the Arataki enable browsing of the music collection,
selecting music to play, and controlling playback of the music through the Tiki digital
to analogue converter.
Digital media controllers can be mobile or fixed devices such as desktop computers
that do not have the requirement for wireless connectivity.
Firmware Upgrade
To ensure the best ongoing operation, firmware upgrades may become available
periodically. The upgrade process requires connection of the Tiki Network Audio
Player to the Internet so it may receive the upgrade files from the Plinius upgrade
server. Your Plinius dealer can inform you of the features and benefits of a firmware
upgrade, and confirm if the upgrade is applicable to your hardware.
Should you choose to apply the available upgrade, your Plinius dealer will arrange
activation of the upgrade for your particular hardware. After the upgrade has been
activated at the upgrade server, you will be advised to switch off and then re-power
your unit. Once the product is re-powered, the upgrade process will begin and takes a
maximum of 5 minutes. After this time the product is ready to be used as normal.
Following an upgrade you will receive advice that the upgrade process was successful.
NOTE: During the upgrade do not switch off, or re-power the unit, or attempt to