Plinius Audio TIKI Network Audio Player - Manual (Page 10)

8 PLINIUS TIKI
2. GROUND LIFT SWITCH
This switch allows the signal ground to be disconnected from the chassis. In some
installations, a hum loop may exist due to duplicate ground paths from different
equipment. Use this switch to remove the connection from 0V to ground thus allowing
some flexibility in your particular set-up.
3. ETHERNET INPUT CONNECTOR
The RJ45 Ethernet connector allows connection to the Router or Computer Network
Device.
4. MAINS POWER CORD IEC CONNECTOR
This connector is where the mains supply cable from your wall connects to the
network audio player. You will notice that a fuse holder is mounted within this
connection, and it holds a mains fuse to provide surge and overload protection for
your network audio player.
5. MAINS SWITCH
The heavy-duty rocker switch on the right of the panel diagram turns the Mains/
Line Power to the network audio player ON or OFF. For your safety, this switch should
remain accessible at all times in case of an emergency.