Psion Teklogix PrintAbout MP2000 - Manual (Page 27)

Printer Configuration
Format Menu
The features contained in the Format Menu affect the location and appearance of the data printed.
Note: Factory default values are indicated by an asterisk (*).
Font
Possible Values: 4.2 cpi SnsSrfA 16.9 cpi SnsSrfA
5.5 cpi SnsSrfA 16.9 cpi Courier*
10.2 cpi SnsSrfA 18.5 cpi SnsSrfA
10.7 cpi SnsSrfA 18.5 cpi Courier
12.7 cpi Courier 20.3 cpi SnsSrfA
13.5 cpi Courier 20.3 cpi Courier
14.5 cpi Courier 22.6 cpi Courier
15.6 cpi Courier 25.4 cpi Courier
34.0 cpi SnsSrfA
Any downloaded fonts will also be displayed.
This feature selects the default font and character pitch.
Spacing
Possible Values: 0 … 3* … 10 Lines
When printing text, this feature sets spacing between lines. The height of a complete line, or line pitch, is
determined by adding the vertical size of the current font to the Spacing. With Spacing set to the default value
of “3” and using a font that is 23 rows high, the line pitch would be 3 + 23, or 26 dot rows. Since each dot row
is 0.125mm, 26 x 0.125 yields a line pitch of 3.25mm or 7.8 lines per inch. This line pitch value also
determines the amount of paper motion performed when an ASCII Line Feed character is received by the
printer.
When printing graphic data, Spacing has no affect so that multiple lines of graphics may print adjacent to each
other.
Left Margin
Possible Values: 0.0000”* … 1.0244” in increments of 0.0394”
This feature sets the left margin in inches relative to the leftmost printing position. (The leftmost print position
is determined by the Left Paper Guide position as described in the Options Menu on page 23.) The left margin
must be less than the right margin.
Right Margin
Possible Values: 0.0000”* … 1.2608” in increments of 0.0394”
This feature sets the right margin in inches relative to the rightmost printing position. (The rightmost print
position is determined by the Right Paper Guide position as described in the Options Menu on page 23.
Text characters and graphic data that would have printed to the right of the margin will be truncated.
Note: The PrintAbout has a maximum print width of 4.1”. However, when Mt3 Emulation has been
selected, the Right Margin will begin indenting from a maximum print width of 2.84” to match the
characteristics of the Psion Teklogix PTX Print Series printers.
21