Psion Teklogix PrintAbout MP2000 User Manual

Page 26

Printer Configuration

WLAN Auth

Possible Values: Auto*, Open, Shared

This feature specifies the authentication method that will be used when establishing connections on the network.
The method may be to use an open key or a shared key. If set to “Auto”, the printer will automatically match
itself to the method used by other nodes.

IP Address Assign

Possible Values: DHCP*, Static

This feature specifies whether the printer will obtain an IP address from a DHCP server, or if an IP address will
be manually assigned.

IP Address

Possible Values: 0.0.0.0*, User specified

This feature specifies the IP address for the printer.

Note that this feature has no effect if IP Address Method is not set to “Static”.

IP Subnet Mask

Possible Values: 0.0.0.0*, User specified

This feature specifies the range of addresses, or the size of the network that the printer’s IP address belongs to.

Note that this feature has no effect if IP Address Method is not set to “Static”.

IP Gateway

Possible Values: 0.0.0.0*, User specified

This feature specifies the network node where data destined for a node outside of the LAN should be directed.

Note that this feature has no effect if IP Address Method is not set to “Static”.

Tunnel Port Number

Possible Values: 00000 … 08023* … 65384

This feature specifies the TCP/IP port to be used for data that is to be printed..