Pioneer DVR-433H-K - Manual (Page 43)

Recording 05
43
En
6 Press ENTER to set the end time.
7 Select ‘Yes’ to set the timer recording and exit, or
‘No’ to go back to the timer recording screen.
Timer recording using the VIDEO Plus+®
programming system
This system makes programming timer recordings very
simple. Most TV guides publish PlusCode programming
numbers with their program details. If you want to make
a timer recording of a program, you just input the
corresponding code. The date, start, stop and channel
settings are made automatically. All you have to do is tell
the recorder the recording mode, and whether it’s a
once-only recording or a regular recording.
1 Press ‘VIDEO Plus+ (SHIFT + MENU)’ to display
the VIDEO Plus+ program screen.
You can also access this screen from the Home Menu
(press
HOME MENU , select Timer Recording , then
VIDEO Plus+ ).
• Use the number buttons to enter the PlusCode
programming number. (To clear the last digit
entered, press
CLEAR .)
• You can also use the / / / buttons to select
digits from the on-screen display.
2 After making the settings, select ‘Enter’ and
press ENTER.
The timer recording screen appears with the timer
program you just set.
3 Confirm that the settings are correct.
If the channel number isn't displayed, use the /
buttons to highlight CH , then use the / buttons to set
the correct channel number.
• If the channel number is set, but incorrectly, set up
the guide channel (see Set VIDEO Plus+ CH on
page 93).
4 Select ‘Store Program’ to finish.
• Other options in the same menu panel allow you to
name the program, and change the recording
destination and/or recording mode.
DVD RECORDER
STANDBY/ON
TOP
MENU
MENU
DISC NAVIGATOR
HOME
MENU
HDD/DVD
TV/DVD DISPLAY
RETURN
AUDIO
HELP CLEAR INPUT SELECT
SUBTITLE ANGLE
VIDEO Plus+
CHANNEL
SKIP
TV DRECT REC
ENTER
REC MODE
ST0P REC REC SHIFT
ONE TOUCH
COPY
BACK CM
ì
PlusCode#
1 3
4 5 6
7 8 9
0 Clear Enter
Cancel
2
DVR-433H_UK.book 43 ページ ２００５年３月１日 火曜日 午後５時６分