Operating guide set up the transmitter, Step – Petsafe Stay+Play Wireless Fence PIF00-12917 User Manual
Page 7
www.petsafe.net 7
Transmitter
Power
Light
LO
W
HIG
H
Power
Jack
Boundary
Switch
Boundary
Control Dial
LOW
HIGH
ALARM
ALARM
Alarm
Disable
Button
Operating Guide
Set Up the Transmitter
Important: You may need to move the Transmitter several times before determining the
final location.
The Transmitter is located at the exact center of the Pet Area. Place the Transmitter:
• At least 2 feet above the floor located on the ground floor of your home.
• In a dry, well ventilated, protected area.
• In an area where temperatures do not fall below -10° F.
• On a non-metal table or other hard surface to ensure proper ventilation (1A).
• Do not place anything on top of Transmitter or cover any ventilation holes. This may
overheat the Transmitter and cause early transmit failure.
• Do not place Transmitter in a closet or any other confined, unventilated area.
• At least 3 feet from large metal objects, as these items may reduce the size and shape of
your Pet Area (1B). Placing the Transmitter inside a metal building or shed can reduce the
maximum range of the Stay + Play Wireless Fence
™
.
You can mount on a wall (1A). A mounting template is included on the back of this guide.
The Transmitter has two built in warning alarms: a
Power Loss Alarm and a Transmission Failure Alarm.
The Transmitter Power Loss Alarm sounds an
intermittent tone alarm indicating power has been
removed from the Transmitter. The Power Loss
Alarm will last up to 30 minutes. In the event of a
power loss, your pet is no longer contained.
There are 3 ways to turn off the Power Loss Alarm.
1. Plug adapter into a functional 120-volt outlet.
Wall
Mount
Tabletop
1A
3ft.
1B
2. Unplug Transmitter power Adapter from the Power Jack located on the bottom of
the Transmitter.
3. Press the Alarm Disable button for 5 seconds then release. Three short tones will sound
to signify the alarm has been turned off.
The Transmission Failure Alarm makes a continuous tone indicating a Transmitter problem.
In this situation, your pet can no longer be contained. Contact the Customer Care Center
for a replacement at 1-800-732-2677.
Step
1