Philips SE245 - Manual (Page 6)

4
Important
1 Important
Take time to read this user
manual before you use your
telephone. It contains important
information and notes regarding
operating your telephone.
1.1 Power requirements
• This product requires an
electrical supply of 220–240
volts, alternating monophased
power, excluding IT
installations defi ned in
standard EN 60-950. In
case of power failure, the
communication can be lost.
• The electrical network
is classifi ed as hazardous
according to criteria in the
standard EN 60-950. The
only way to power down
this product is to unplug the
power supply unit from the
electrical outlet. Ensure the
electrical outlet is located
close to the apparatus and is
always easily accessible.
• The voltage on the
network is classifi ed as
TNV-3 (Telecommunication
Network Voltages), as
defi ned in the standard EN
60-950.
Warning
• This equipment is not
designed to make emergency
calls in the event of a power
failure. An alternative has to
be made available to allow
emergency calls.
• High voltage. Never open the
product or attempt any repair.
• Keep the product away from
liquid.
• Never use any battery type
other than the one supplied.
There is a risk of explosion if
the batteries are replaced by
an incorrect type.
• When the phone is ringing
avoid holding the earpiece
too close to your ear as it
may damage your hearing.
• Do not use the product
in places where there are
explosive hazards.