Philips SE245 - Manual (Page 46)

44
5
Press to confi rm.
10.8 Remote access
Remote access allows you
to operate your answering
machine and listen to your
messages by calling your SE245
from another phone.
The default setting is activated.
1
Call your SE245. When
you hear your outgoing
message, press #.
2
Enter your 4 digit PIN.
The default code is 0000.
You hear a confi rmation beep.
Note
Change this code for
increased security, see ‘PIN’,
on page 38.
3
After entering your PIN,
as stated above, use the
keypad to operate your
SE245 answering machine :
Play all messages 2
Play previous message 1
Play next message 3
Delete message playing 6
Switch answer machine on 7
Stop playback 8
Switch answer machine off 9
10.8.1 Remote Access
activated/deactivated
1
Press scroll to
ANSW MACHINE and press
.
2
Scroll to ANSW
SETTINGS and press .
3
Scroll to REMOTE ACC
and press .
4
Scroll or to
select ACTIVATED or
DEACTIVATED .
5
Press to confi rm.
10.9 Call screening
Use your handset or base
speaker to hear a caller leaving
a message. You can then choose
to ignore the caller or pick up
the call.
The default settings are :
• Handset call screening : Off
• Base call screening : On.
At the handset :
1
If you want to interrupt and
take the call press or
.
Using your answering machine