Philips SE245 - Manual (Page 38)

36
5
Enter the number.
Press to confi rm.
6
Press to return to
standby.
9.4.3 Dial a baby call number
1
When a baby call number
has been stored and the
baby call setting switched
on, press any key (except
) on the keypad to dial
the number.
Note
When baby call is switched
on, you can still answer any
incoming call as normal.
9.5 Registration
Up to 5 handsets can be
registered to one base station.
Additional handsets must be
registered to the base before
you can use them.
Notes
• The instructions described
below apply specifi cally to
your Philips SE245 handset.
If you wish to register
another manufacturer’s
handset, the instructions may
vary. In this case, please refer
to the manufacturer of the
additional handset.
• The Master PIN is required
before you can register or
unregister handsets. The
default PIN is 0000.
9.5.1 Register a handset
1
At the base, press and hold
for about 3 seconds.
The base station emits a beep
when it is ready to accept
registration.
Note
The base is able to accept
registration from a handset
within 90 seconds. If
is pressed, registration is
cancelled.
2
At the handset, press
and scroll to
ADVANCED SET and press
.
3
Scroll to
REGISTRATION and press
.
Advanced settings