Philips SE245 User Manual

Page 20

Identifi cation service (CLI).
Please contact your network
provider for more information
on this service.
To answer the second call,
press

4.1.6 Call from the call log

Press .

The fi rst entry in the call log
is displayed.

Scroll or

to the

entry you want.

Press to dial the

number.

Note

You need to subscribe to
your network’s Caller Line
Identifi cation service to be able
to see the caller’s number in
the call log. See ‘Call log’ on
page 25 for more details.

4.1.7 Answer a call

The phone rings and

fl ashes in the display. Press

or press

to answer

the call via the loudspeaker.

Warning

When the phone is ringing, avoid
holding the earpiece too close to
your ear as it may damage your
hearing. Handsfree activation can
suddenly increase the volume in
the earpiece to a very high level.
Make sure the handset is not too
close to your ear.

Tip

If Auto pick-up mode is on
(see page 32), simply lift up the
handset from its base to answer
the call. The default setting is
off, in which case you will need
to press

to answer a call.

Note

An incoming call has priority
over other events. Whenever
there is an incoming call, other
status in progress such as
phone setting, menu navigation,
etc. will be aborted.

4.1.8 Adjust volume

During a call, press

to adjust the earpiece

or loudspeaker volume.
The volume level is shown in
the handset display.

Using your SE245