Philips SE245 User Manual
Page 17
2
Plug the other ends of the
line cord and power cable
into the telephone socket
and mains power socket.
3.3 Install and charge the
handset batteries
Warning
• The handset must be charged
for at least 24 hours before
using it for the fi rst time.
• Never use any battery type
other than the one supplied.
There is a risk of explosion if
the batteries are replaced by
an incorrect type.
Your SE245 is supplied with
two rechargeable batteries.
1
Slide off the battery door
(if fi tted).
2
Insert the batteries as
indicated and slide the door
back on.
3
Place the handset face up
on the base to charge.
A beep confi rms the handset
is placed correctly and
charging will begin.
4
When there is enough
power in the batteries, the
handset will automatically
register with the base.
The standby screen is
displayed. Or if the display
shows
WELCOME:
you must
select your country.
See next page.
Getting started
15