5 using the software, 1 can monitor pcan-view for windows, Using the software – PEAK-System Technik RS-232 User Manual
Page 20: Can monitor pcan-view for windows, 5using the software

PCAN-USB Hub – User Manual
20
5
Using the Software
This chapter covers the provided software PCAN-View and the
programming interface PCAN-Basic.
5.1
CAN Monitor PCAN-View for Windows
PCAN-View for Windows is a simple CAN monitor for viewing
transmitting, and logging CAN messages.
Figure 9: PCAN-View for Windows
Do the following to start and initialize PCAN-View:
1. If PCAN-View is already installed on the hard disk, open the
Windows Start menu, go to Programs > PCAN-Hardware,
and select the entry PCAN-View.