Polycom 3150-30828-001 - Manual (Page 5)

Polycom® RSS™ 4000 Getting Started Guide – Version 5.0
2
Parameter Description
Form Factor 2U 19” rack mount
Height 89 mm
Width 441 mm
Depth 485 mm
Gross Weight 19.5 kg
Power Supply
700W ATX AC power supply w/PFC,
dundant Power Supply 1 + 1 Re
AC Voltage 100 - 240 VAC, 60-50 Hz, 10-4 Amps
Operation System Windows XP EK
First Time Installation and Configuration
the following information from your network administrator:
 Polycom® RSS™ 4000 unit, Subnet Mask and Default Gateway IP addresses
 Gatekeeper IP address, Prefix, and E.164 of the Polycom® RSS™ 4000.
Unpacking and Installing the Polycom® RSS™ 4000
o an
ely rated socket outlet. The Polycom® RSS™ 4000 unit is supplied with
4 Turn on the power switch.
Preparations
Obtain
1
Place the Polycom® RSS™ 4000 unit on a stable flat surface in the selected
location.
2 Insert each power cord connector into the rear of the unit and connect each t
appropriat
two power cords, BOTH power cords should be connected to the mains power
supply during normal operation.
3
Connect the LAN cable to LAN1 in the back of the system.