Pioneer Super Tuner III D DEH-P3950MP - Manual (Page 17)

Black plate (17,1)
Introduction of audio
adjustments
2 2 2
1 1
3 3 3 4 4 4 5 5 5
1 Audio display
Shows the audio adjustment status.
2 BASS indicator
Shows when the bass boost is in effect.
3 SW indicator
Shows when the subwoofer output is turned
on.
4 LOUD indicator
Appears in the display when loudness is
turned on.
5 FIE indicator
Shows when the front image enhancer is
turned on.
% Press AUDIO to display the audio func-
tion names.
Press
AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)
—EQ (equalizer
curve adjustment)
—LOUD (loudness)—
SUB.W (subwoofer on/off setting) —80: 0 (sub-
woofer setting)
—HPF (high pass filter)—BASS
(bass boost)
—FIE (front image enhancer)—
SLA (source level adjustment)
# When the subwoofer controller setting is
P/O :FUL, you cannot switch to SUB.W. (Refer to
page 22.)
# You can select the 80: 0 only when subwoofer
output is turned on in
SUB.W.
# When the F.I.E. function is on, you cannot se-
lect
HPF.
# When the rear output setting is R-SP :S/W,
you cannot select
FIE.
# When selecting the FM tuner as the source,
you cannot switch to
SLA.
# To return to the display of each source, press
BAND.
# If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Using balance adjustment
You can change the fader/balance setting so
that it can provide you an ideal listening envir-
onment in all occupied seats.
1 Press AUDIO to select FAD.
# If the balance setting has been previously ad-
justed,
BAL will be displayed.
2 Press a or b to adjust front/rear speak-
er balance.
FAD :F15 to FAD :R15 is displayed as the
front/rear speaker balance moves from front to
rear.
# FAD : 0 is the proper setting when only two
speakers are used.
# When the rear output setting is R-SP :S/W,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page 22.
3 Press c or d to adjust left/right speaker
balance.
BAL : L15 to BAL : R15 is displayed as the left/
right speaker balance moves from left to
right.
Using the equalizer
The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
17
Audio Adjustments
En
17
English
Section
06