Built-in player playing a disc, Introduction of advanced built-in cd player, Operation – Pioneer Super Tuner III D DEH-P3950MP User Manual
Page 10: Playing a disc, Built-in player
Black plate (10,1)
Playing a disc
4
4
4
3
3
3
2
2
2
5
5
5
6
6
6
1
1
1
1 Folder number indicator
Shows the folder number currently playing
when playing a WMA/MP3/WAV disc.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent track (file).
3 Track number indicator
Shows the track (file) number currently play-
ing.
! If a track number 100 or more is selected,
d on the left of the track number indica-
tor will light.
4 RPT indicator
Shows when repeat range is selected to cur-
rent track (file).
5 WMA indicator
Shows when a WMA file is playing.
6 MP3 indicator
Shows when an MP3 file is playing.
1
Insert a CD (CD-ROM) into the disc load-
ing slot.
Playback will automatically start.
# Be sure to turn up the label side of a disc.
# After a CD (CD-ROM) has been inserted, press
SOURCE to select the built-in CD player.
# You can eject a CD (CD-ROM) by pressing
EJECT.
2
Press a or b to select a folder when
playing a WMA/MP3/WAV disc.
# You cannot select a folder that does not have
a WMA/MP3/WAV file recorded in it.
# To return to folder 01 (ROOT), press and hold
BAND. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
3
To perform fast forward or reverse,
press and hold c or d.
# If you select ROUGH, pressing and holding c
or d enables you to search every 10 tracks in the
current disc (folder). (Refer to Searching every 10
tracks in the current disc or folder on page 12.)
4
To skip back or forward to another
track, press c or d.
Notes
! Read the precautions with discs and player on
! If an error message such as ERROR-11 is dis-
played, refer to Understanding built-in CD
player error messages on page 24.
! There is sometimes a delay between starting
up disc playback and the sound being issued.
When being read,
FRMTREAD is displayed.
! When playing CD-EXTRA or MIXED-MODE
CDs, WMA/MP3/WAV and CD-DA can be
swithced by pressing
BAND.
! If you have switched between WMA/MP3/
WAV files and audio CD-DA, playback starts at
the first track on the disc.
! The built-in CD player can play back a WMA/
MP3/WAV file recorded on CD-ROM. (Refer to
page 25 for files that can be played back.)
! When playing back VBR (variable bit rate) re-
corded files, erapsed play time may not be dis-
played correctly.
! When playing WMA/MP3/WAV disc, there is
no sound on fast forward or reverse.
Introduction of advanced
built-in CD player operation
% Press FUNCTION to display the function
names.
Press
FUNCTION repeatedly to switch be-
tween the following functions:
Built-in Player
En
10
Section
04