Polycom RSS 2000 User Manual
Page 22
DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc
Subject
Description
When working in routed mode with a gatekeeper, devices that are trying
to call to the RSS – with IP address, will be rejected if they are not
register to the same GK.
This is the right policy when working with routed mode on the GK
MGC Integration
1, When working with the MGC in Video switching mode – the RSS will
indicate HD
2, You can disable HD or define the minimum rate for HD in the single
point recording setting in the RSS V2.0, or as alternative disable the HD
in system.cfg of the MGC
HDX Interoperability
Playback of H263 recording to the HDX may result with some video
artifacts
Clustering
1．Only the archives, the view right of which was “Allow All”, can be
shared.
2 ． During clustering, the archives, that wasn’t saved on the local
RSS2000, can not be deleted, and it’s properties can not be modified.
Hunting
Each RSS 2000 is capable of 2 recording and 8 H323 playbacks (total of
10 H323 Connections).
1,When using the RSS Hunting function with Cisco GK – the GK will hunt
to the next available RSS after the RSS is full with 10 H323 connection.
2, Hunting can only support by PN/SE2000; RDVISION GK ; Cisco GK .
Pause without
recording (RSS-381)
RSS can not pause a streaming without recording task ,just to use stop
function
V3.0 upgrade
V3.0 have 2 upgrade packages , can not be covered in one package ,
part is with all functions , part2 is with multi languages package, so
some customer need to upload 2 packages . For details , please read
the V3.0 upgrade guide
Multi language
support
1, image requirement: Languages (except English/Japanese/Chinese)
require image V5.0 . For details , please read the V3.0 upgrade guide
(it is a part of this document)
2, IVR support – RSS2000 V3.0 only support
English/Chinese/Japanese IVR , RSS will play English IVR for all other
languages – however, the user can manually upload any IVR he prefer
to accommodate his language requirements
Upload Utility
H.263 / H.263+ 4CIF archives can not be uploaded to RSS
HD archives
transcode status
When moving mouse cursor on the play button of an archive , if it is an
HD archive being transcoding , so play button will be a special status ,
then you will see a percentage number to show the transcoding
process
Limitation is that if uses don’t refresh the page , the percentage will
not have any update