Printek FORMSMASTER 8000SE - Manual (Page 67)

P R I N T E R C O N F I G U R A T I O N
59
Possible Values: Off, On*
This item enables or disables automatic Carriage Returns (CR) whenever a
Line Feed (LF), Vertical Tab (VT), or Form Feed (FF) is received.
Automatic Line Feed Auto LF
Off
Possible Values: Off*, On
This item enables or disables automatic Line Feeds (LF) when a Carriage
Return (CR) is received.
Perform Host Form Feed at Top-of-Form Host FF at TOF
No
Possible Values: No*, Yes
This item selects whether Form Feeds (FF) will be performed when
received from the host computer if the paper is already positioned at the top
of form (TOF). Setting this item to
No will help prevent blank pages.
Characters Characters
Control
Possible Values: Control*, Printable
This item selects whether certain control character symbols will be printed
or be treated as control characters. The effect of this is dependent upon the
emulation selected above.
Minimum Buffer Minimum Buffer
No
Possible Values: No*, Yes
This item selects whether the minimum I/O buffer size should be used.
Setting this item to
No will allow the printer to make maximum use of the I/O