Philips CD6452B - Manual (Page 25)

23 Use more of your phone
5.7.3.2 How to modify call barring
number
Press
<
to access the main menu
Press
u
/
d
to select Advanced Set
Press
<
and
u
/
d
to select Call
Barring
Press
<
to enter the 4-digit master PIN
when prompted (default master PIN is 0000)
Press
<
and
u
/
d
to select Barring
Number
Press
<
to choose a number ( Number 1 ,
Number 2 , Number 3 , Number 4 )
Press
<
to enter the number
Press
<
to save the settings
Note
If a restricted number is dialed, the call will not be
connected. When this happens, the phone emits
an error tone and returns to idle mode.
5.7.4 Baby call
When activated, the Baby Call feature enables
you to dial the selected number by pressing any
key on your handset. This feature is very useful
for direct access to emergency services.
Note
You can enter up to 24 digits for baby call
number.
5.7.4.1 How to activate baby call mode
Press
<
to access the main menu
Press
u
/
d
to select Advanced Set
Press
<
and
u
/
d
to select Baby Call
Press
<
to select Mode
Press
<
and
u
/
d
to select On
Press
<
to save the settings
• The message “ BabyCall On ” will display on the
idle screen.
5.7.4.2 How to deactivate baby call mode
Press and hold
<
(when Baby Call mode
has been activated before).
Press
u
/
d
to select Off
Press
<
to save the settings
• The message “ BabyCall On ” will disappear on
the idle screen.
5.7.4.3 How to change baby call number
Press
<
to access the main menu
Press
u
/
d
to select Advanced Set
Press
<
and
u
/
d
to select Baby Call
Press
<
and
u
/
d
to select Number
Press
<
to enter the number
Press
<
to save the settings
5.7.5 How to manually select a base
station
One CD645 handset can register up to four
different CD645 base stations.
Press
<
to access the main menu
Scroll
u
/
d
to select Advanced Set
Press
<
and
u
/
d
to select Base
Selection
Press
<
and
u
/
d
to select your
desired base station
Press
<
to confirm
5.7.6 How to register an additional
handset
The procedures described below are the
procedures that you will find in your handset. The
procedures may very according to the handset
you want to register. In this case, please refer to
the manufacturer of the additional handset.
Additional handsets must be registered to the
base unit before you can use them. Up to 5
handsets can be registered to one base station.
The Master PIN is required before you can
register or unregister handsets.
Press
<
on the handset to access the main
menu
Scroll
u
/
d
to select Advanced Set
Press
<
and
u
/
d
to select
Registration
Press
<
and
u
/
d
to select your
desired base station
Note
The registered base station is marked with an
asterisk at the rightmost of the display.
Press
<
and enter the 4-digit master PIN
when prompted (default master PIN is 0000)
Press
p
on the base station for more than
three seconds until you hear a beep tone.
Now the base station is ready to register the
new handset.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
1
2
3
1
2
3
4
5
6
1
2
3
4
5
1
2
3
4
5
6
CD645_IFU_US_English.book Page 23 Friday, August 3, 2007 5:10 PM