Philips CD6452B - Manual (Page 14)

12 Getting started
3.4 Configure your phone
Depending on your country, the Welcome
screen may not appear. In that case, you do not
need to select the country code to configure your
phone.
Before using your phone, you need to configure it
according to the country of use. After charging it
for a few minutes, the Welcome screen appears.
Follow these steps to configure your phone:
Press
<
to display the list of countries
• Available country will display on the screen.
Note
If
>
is pressed, the handset will show the
Welcome screen again.
Press
u
/
d
to scroll to your country
Press
<
to confirm your selection
• Your phone is configured according to your
selected country and back to idle screen.
Note
Once the country is selected, the default line
settings for the selected country will be applied to
your phone automatically.
Tip
If you chose the country in use wrongly or would
like to change the country after the first
configuration, you can press
<
in idle mode to
enter into the main menu, input ##**793 to reset
to default settings. After around 30 seconds, the
phone will go back to
Welcome screen and you
can select the country again.
3.5 How to power off or on the handset
power
You can power off your handset in order to save
battery power.
Press and hold
e
for about five seconds to
power off the handset
Press
e
to power on the handset again
1
2
3
1
2
CD645_IFU_US_English.book Page 12 Friday, August 3, 2007 5:10 PM