Philips CD6452B - Manual (Page 12)

10 Your phone
2.2.3 Base station
A Stop / Play key
Press to play the message (the first recorded
will be played first)
Press to stop message playback
B LED Message counter
When the answering machine is off:
-- steady: Indicate that the answering machine
is off
Fu and -- blink alternately: When the
message memory is full
09 and -- blink alternately: When there are
new messages (e.g. 09 is the total number of
messages in the memory)
When the answering machine is on:
00 Steady: Indicate that there is no message
02 Blinking: Display when new messages are
received (e.g. Two new messages are
received or one message is new and one
message is old).
02 Steady: Display number of old messages
(e.g. two old messages in the memory).
03 On for one second: Indicate the base
speaker volume level is 3 (six base speaker
volume levels from 00 to 05 are provided
where 00 means base speaker volume is off
and 05 has the highest speaker volume)
Ao Steady: Display when answer only mode
is selected
P1 Steady: Display when playing answer &
record outgoing message
P2 Steady: Display when playing answer only
outgoing message
rE Steady: Display when recording incoming
message
rA Steady: Blink when accessing line remote
C Answering machine ON/OFF key
Press to turn on or off the answering machine.
D Erase key
Delete current message during message
playback.
Long press to delete all the messages when
answering machine system is in standby
mode.
Note
Unread message will not be deleted.
E
Repeat key
Press to go back to previous message
F Skip key
Skip to next message during message
playback
G + / - key
Increase (+) or decrease (-) speaker volume
during message playback
H Handset locator key
Press to locate the handset
Press and hold for three seconds to start
registration procedure
A
B
F
G
H
D
E
C
CD645_IFU_US_English.book Page 10 Friday, August 3, 2007 5:10 PM