Panasonic PV-V4525S - Manual (Page 16)

MTS Broadcast
MONO broadcast
Normal monaural sound broadcast.
SAP broadcast
Secondary Audio Program (sub language) broadcast.
Select SAP audio mode for the sub language.
MTS Stereo broadcast
Multi-channel Television Sound Stereo broadcast.
Select STEREO audio mode.
• If stereo broadcast is weak and display flickers, select MONO
audio mode for possible better results.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo (main language) and
Secondary Audio Program (sub language) broadcasts are being
received simultaneously. Select STEREO or SAP audio mode.
The following are possible audio broadcast types and on-screen displays.
The signal being received is indicated with a “ ” mark while the selected audio mode is indicated
with an arrow.
To display the broadcast signal being received,
➛
➛ ➛ ➛ ➛ press DISPLAY*.
Equipped with ® -TV Noise Reduction for true
MTS reproduction. ® -TV Noise Reduction is
required for good stereo separation and audio
fidelity.
® is a registered trademark, and is
licensed by ® Technology Licensing.
Make the Audio/Video Connection as shown on page 3.
• You can use a TV connected to Stereo amp and speakers instead of a Stereo TV.
Connection
Receivable Broadcast Types
- 4 -
STOP 12 : 0 0AM CH 02
0 : 00 : 00
SP STEREO
SAP
MONO
STOP 12 : 0 0AM CH 02
0 : 00 : 00
SP STEREO
SAP
MONO
STOP 12 : 0 0AM CH 02
0 : 00 : 00
SP STEREO
SAP
MONO
STOP 12 : 0 0AM CH 02
0 : 00 : 00
SP STEREO
SAP
MONO
L
R
Stereo Amplifier
AUDIO IN
R
L
VCR
OUT TO TV
VHF/UHF
TV
R
L
AUDIO OUT