Panasonic PT-AE100E - Manual (Page 10)

L
|
AUDIO
|
R
AUDIO
VIDEO IN
PC IN VIDEO S2 VIDEO
L
|
AUDIO
|
R
Y
P B /C B
P R /C R
COMPONENT IN
E NGLISH -19
Preparation
18-E NGLISH
Example of connecting to video equipment
DVD player
Video deck
NOTE:
B Only one audio system circuit is available for the AUDIO L-R input jacks
for S-VIDEO/VIDEO signals, so if you wish to change the audio input
source, you will need to remove and insert the appropriate plugs.
B If the signal cables are disconnected or if the power supply for the
computer or video deck is turned off while the digital zoom or index
window functions are being used, these functions will be cancelled.
NOTE:
B It is better to shut down the computer before turning off the MAIN POWER
switch of the projector.
B Refer to the list of compatible signals on page 49 for the types of RGB
signals which can be input to the projector by connecting a computer.
Example of connecting to computer Connections
Notes on connections
B Read the instruction manual for each system component carefully before
connecting it.
B Turn off the power supply for all components before making any
connections.
B If the cables necessary for connecting a component to the system are not
included with the component or available as an option, you may need to
fashion a cable to suit the component concerned.
L
|
AUDIO
|
R
AUDIO
VIDEO IN
PC IN VIDEO S2 VIDEO
L
|
AUDIO
|
R
Y
P B /C B
P R /C R
COMPONENT IN
Computer
To video output To audio
output
To audio
output
To S-Video output
To RGB output To audio output