Paxar Monarch 9805 User Manual

Page 17

For Thermal Direct 40

to 104

to 40

Print Speed:

2.5 ips (64 mm) for all serial bar codes and 4.0 ips
(102 mm). 6.0 ips (152 mm) is available only for
thermal transfer printing.

S u p p l y S p e c i f i c a t i o n s

For high temperature or high humidity environments, contact Monarch for
supply recommendations. Continuous supply does not have perforations
or black marks and must be used in continuous mode.

Supply Types:

Thermal Transfer, Direct Die Cut, or Continuous
without black marks

Supply Widths:

1.2 inches (31 mm) minimum
4.25 inches (108 mm) maximum

Supply Lengths:

1.0 inch (31 mm) minimum
6.5 inches (165 mm) maximum

Supply Roll Length:

2,952 inches (75 meters)

R i b b o n S p e c i f i c a t i o n s

Do not leave ribbon in sunlight, high temperatures or humidity.

Ribbon Type:

Standard

Ribbon Widths:

1.3 inches (33 mm)
1.6 inches (41 mm)
2.16 inches (55 mm)
3.15 inches (80 mm)
4.13 inches (105 mm)

Ribbon Length:

23,600 inches (600 meters)

A b o u t R i b b o n s

The width of the ribbon must be greater than the supply width. Since
some supplies are more abrasive to printheads than others, using a
ribbon wider than your supply helps protect the printhead. Replacement
printheads are expensive.