Panasonic BT-H1700BP - Manual (Page 17)

17
FUNCTION SETTING
Selects the control systems for the COLOR SYSTEM,
synchronized signal, RUSH DELAY TIME, tally lamp
colors, and MAKE/TRIGGER terminal.
• Checks the amount of time that the monitor has been used.
• Selects the audio channel group for the EMBEDDED
AUDIO. (When an input card compliant with EMBEDDED
AUDIO is installed.)
Press the button to
display the setting menu
illustrated on the right.
7
COLOR SYSTEM
Selects the color system when using the video input
card.
AUTO : Changes NTSC and PAL automatically.
NTSC : Keeps the color system NTSC.
PAL : Keeps the color system PAL.
NOTE:
Normally select AUTO. However, if the input signal is unstable, select
NTSC or PAL.
7
SYNC SELECT
Synchronized signal selection.
INT. : The input video signal is synchronized with the built-
in sync signal.
EXT. : The input video signal is synchronized with an
external signal from an external sync terminal.
7
RUSH DELAY TIME
Sets the time when the power supply to the monitor’s
circuits (excluding the micro computers) starts after the
power switch is pressed.
STD. : The power supply starts approx. 1 second after the
power switch is pressed.
SLOW : The power supply starts approx. 3.2 seconds after
the power switch is pressed.
NOTE:
If you are going to turn several Multi-Format Monitors on at the same
time, it is recommended to apply SLOW to some of the monitors to
control rush current.
7
TALLY SELECT
Selects the color of the tally lamp (when lit) on the
upper front panel.
GREEN : The tally lamp lights in green.
RED
: The tally lamp lights in red.
7
REMOTE SYSTEM
Selects the control system for the MAKE/TRIGGER
terminals. Refer to “HOW TO USE THE MAKE/
TRIGGER TERMINAL” on page 21.
• MAKE (make contact)/TRIGGER (trigger contact)
7
E.AUDIO GROUP
Selects the audio channel group for EMBEDDED
AUDIO. It is displayed when an input card compliant
with EMBEDDED AUDIO is installed.
• 1G/2G/1-2G
1G :
2G :
1-2G :
NOTE:
The auto setting mixes and outputs all 8 signal channels. Sets the
output level automatically by detecting the number of channels
receiving the signal.
* About sound output level
Sound output level is set to a standard output level for all channels
when several sound channels are output at the same time. The
more channels are selected, the lower each channel’s level will be.
(Each channel’s level becomes half for 1– 2 channel, 1/4 for 1– 4
channel.)
7
HOUR METER X100h
Displays the total usage time of the monitor in hundred-
hour units.
• 000 ~ 655
NOTES:
• When the timer passes 655, it returns to 000.
• The timer does not count the usage time under one hour.
5ch 6ch 7ch 8ch 5-6ch 7-8ch 5-8ch
AUTO 5-8ch 1-4ch 7-8ch 5-6ch 3-4ch
1ch 2ch 3ch 4ch 5ch 6ch 7ch 8ch 1-2ch
7
ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS
1ch 2ch 3ch 4ch 1-2ch 3-4ch 1-4ch
COLOR SYSTEM : AUTO
SYNC SELECT : INT.
RUSH DELAY TIME : STD.
TALLY SELECT : GREEN
REMOTE SYSTEM : MAKE
E.AUDIO GROUP : 1G
HOUR METER X100h : 000
EXIT: MENU ADJUST: – + SELECT:
LCT1464-001A_EN_16-21-B 03.9.19, 14:46 17