Philips DECT515 - Manual (Page 22)

SMS 21
http://www.philips.com/faqs/dect
SMS stands for Short Message Service.To benefit from this service you must subscribe to the Caller
Line Identification Service (CLI) together with the SMS service from your network provider. SMS
can be exchanged with a phone (mobile or compatible fixed lines) provided the receiver has also
subscribed to the CLI & SMS services.
Your DECT 511/515 factory settings correspond to the main national
operator. If you wish to send or receive SMS through another service
provider you must set the corresponding numbers (see page 27 and the
SMS leaflet).
A password can protect your SMS box*, but it is not compulsory.
To send an SMS to the receiver’s own SMS box*, you must know his destination box.
To send an SMS to a phone
Press to directly reach Send new SMS and select
Enter the phone number directly and press OK or press to
retrieve the number from the Phonebook
Enter the Destination box* number (optional), press OK .
Note: the destination box is the SMS box of the receiver.
Select your SMS box* (only if you have created several SMS boxes).
To create a SMS box please refer to SMS settings page 25
Send new SMS
SMS menu is also accessible via the
carousel or
Important information are also
available on the SMS leaflet in the box
Press to select Send now, otherwise
if you want to store your SMS, scroll to Store and select .
The SMS stored can be later retrieved from Read SMS
Enter the text and press (see page 19)
Enter the password if any and press OK (optional)
* only available in the UK
SMS
Send new SMS
Read SMS
SMS settings
The sent SMS can be up to a maximum of 160 characters long.The special characters ¤, ] and [
count for 2.The DECT 511/515 can store 25 SMS for the 3 boxes*.
DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:02 Page 19