beautypg.com

Declaration of conformity, Using gap standard compliance – Philips DECT515 User Manual

Page 14

background image

Declaration of conformity

13

http://www.philips.com/faqs/dect

Philips has marked the battery and packaging with standard symbols designed to promote the recycling and appropriate

disposal of your eventual waste.

A financial contribution has been paid to the associated national recovery & recycling system.

The labelled packaging material is recyclable.

DECT

TM

is a Trade Mark of ETSI registered for the benefit of the implementers of the DECT technology.

We
Philips Consumer Electronics
Route d’Angers
72081 Le Mans Cedex 9
France

Declare that the products DECT 511xx and DECT 515xx are in compliance with the Annex III
of the R&TTE-Directive 1999/5/EC and then with the following essential requirements:

Article 3.1.a (protection of the health & the safety of the user) : EN 60950-1 (10/2001)

Article 3.1.b (protection requirements with respect to electromagnetic compatibility :
ETSI EN 301 489-6 V1.2.1 (08/2002) & ETSI EN 301 489-1 V1.4.1 (08/2002)

Article 3.2 (effective use of the radio spectrum) EN 301 406 (2003)

The presumption of conformity with essential requirements regarding Council Directive
1999/5/EC is ensured.

Date : 10/05/2004 Le Mans
Quality Manager, Home Communication

Using GAP standard compliance

The GAP standard guarantees that all DECT

TM

GAP handsets and base stations comply with a

minimum operating standard irrespective of their make.Your DECT 511/515 handset and base
station are GAP compliant, which means the minimum guaranteed functions are : register a
handset, take the line, receive a call and dial.The advanced features may not be available if you
use another handset than a DECT 511/515 with your base station.
To register and use your DECT 511/515 handset with a GAP standard base station of a
different make, first follow the procedure described in the manufacturer’s instructions, then
follow the procedure page 28.
To register a handset from another make to the DECT 511/515 base station, place the base
station into registration mode (page 28), then follow the procedure in the manufacturer’s
instructions.

Declaration of conformity

DECT511_GBIE_part1_indice2_internet.qxd 26/10/2004 14:00 Page 11

This manual is related to the following products: