Powering the camera, Installing the batteries – Pentax 33WR User Manual

Page 14

Text mode
Original mode

Getting Started

Powering the Camera

Install batteries in the camera. Use one CR-V3, or use two AA lithium
batteries, AA Ni-MH batteries, or AA alkaline batteries.
Turn off the camera when setting batteries.
Wipe away water or dirt from the camera with a dry cloth before setting
batteries.
Do not set batteries with wet or dirty hands.

Slide the battery cover in the direction of the arrow

and flip open.

Insert the batteries according to the +- indicator in
the battery chamber.

Wipe away any sand or debris on the water-resistant
packing and the areas between the camera and the
packing.

Close the battery cover and push horizontally to lock.

Installing the Batteries

(Using AA batteries)

(Using CR-V3)