Messages – Pentax 33WR User Manual
Page 106
104
7
Appendix
Messages
The following messages may be displayed on the LCD monitor during
camera operation.
Compression error
Compression of the image you captured has failed.Change
the recorded pixels or quality level, and take a picture again.
Memory card full
The SD Memory Card / MultiMediaCard memory is full and
no more images or sound can be saved.Insert a new SD
Memory Card / MultiMediaCard or delete unwanted images
or sound.(p.16, 77)
You may be able to save the image by changing the quality
level or recorded pixels.(p.40, 41)
Data being recorded
The image/voice recording is being recorded on the SD
Memory Card / MultiMediaCard.
Image folder could not
be created
The maximum file number has been used, and no more
images or sound can be saved.Insert a new SD Memory
Card / MultiMediaCard or format the card.(p.16, 90)
No image & sound
There are no images or sound saved in the SD Memory
Card / MultiMediaCard that can be played back.
Camera cannot display
this image
You are trying to play back an image not supported by this
camera.You may be able to display this on a PC or another
brand of camera.
Image protected
This is displayed when you try to delete a protected image.
Setting being recorded
The image/sound protect settings or DPOF settings are
being changed.
Settings not stored
The SD Memory Card / MultiMediaCard is full, and no more
DPOF settings can be made.Delete any unwanted images
or sound and try to make the settings again.
Alarm was set
This is displayed when the alarm is set and the camera is
about to be automatically turned off.
Deleting
An images or sound on the SD Memory Card /
MultiMediaCard is being deleted.
Battery depleted
The battery is exhausted.Replace the battery.(p.12)
Memory card error
Shooting and playback are impossible due to a problem
with the SD Memory Card / MultiMediaCard.Try displaying
it on a PC.
Card not formatted
The SD Memory Card / MultiMediaCard you have inserted
is unformatted or has been formatted on a PC or other
device and is not compatible with the camera.(p.90)
Formatting
The SD Memory Card / MultiMediaCard is being formatted.
No card in camera
An SD Memory Card / MultiMediaCard has not been
inserted into the camera.(p.16)
Card locked