Advanced settings, Baby call, Registration – Philips ID937 User Manual
Page 44
44
EN
Advanced Settings
Baby Call
When activated, the Baby Call feature enables you to dial a number by pressing any key on your handset. This
feature is very useful for direct access to emergency services.
To activate Baby Call mode
1. Press
m
MENU
, scroll
:
to
Advanced Set
and press
m
SELECT
, scroll
:
to
Baby call
and press
m
SELECT
.
2. Enter the Master PIN when prompted and press
m
OK
to confirm.
3. Press
m
SELECT
to enter
Mode
.
4. Scroll
:
to
On
and press
m
SELECT
to confirm.
5. Enter the Baby Call number and press
m
OK
to confirm.
A validation tone is emitted.
To deactivate Baby Call mode
1. Long press
m
MENU
(when Baby Call mode has been activated before).
2. Scroll
:
to
Off
and press
m
SELECT
to confirm.
To change Baby Call number
1. Press
m
MENU
, scroll
:
to
Advanced Set
and press
m
SELECT
, scroll
:
to
Baby call
and press
m
SELECT
.
2. Enter the Master PIN when prompted and press
m
OK
to confirm.
3. Scroll
:
to
Number
and press
m
SELECT
.
4. The last stored Baby Call number is displayed (if any).
5. Enter the new Baby Call number and press
m
OK
to confirm.
A validation tone is emitted and the screen returns to previous menu.
Registration
The procedures described below are the procedures that you will find in your ID937 handset. The procedures
may vary according to the handset you want to register. In this case, please refer to the manufacturer of the
additional handset.
Additional handsets must be registered to the base unit before you can use them. Up to 6 handsets can be
registered to one base station.
You can enter up to 20 digits for baby call number.
The default Master PIN number is
0000
.
The default Master PIN number is
0000
.
The Master PIN is required before you can register or unregister handsets. The default PIN is
0000
.
ID937_IFU_EN.book Page 44 Friday, December 1, 2006 12:23 PM