Manual tuning procedure, Direct tuning procedure, Fine tuning procedure – Panasonic NV-SJ400A User Manual
Page 10: Blanking of unused programme positions
10
Preparations
≥
Confirm that the TV is on and the VCR viewing channel is
selected.
≥
Turn on the VCR and select any programme position
except A1 or A2.
≥
Set the VCR/TV switch R is set to “VCR”.
Manual Tuning Procedure
1
Press the MENU button V to display the Main menu on
the TV screen.
2
Press the Cursor buttons (34
34
34
34
34
) T to select “TUNER
PRESET” then press the ENTER button U.
3
Press the Cursor buttons (34
34
34
34
34
) T to select “CH” then
select the channel number you want to tune by pressing
the Cursor buttons (2 1
2 1
2 1
2 1
2 1
) T.
4
Confirm that “CLEAR” is set to “OFF”.
5
Press the Cursor buttons (34
34
34
34
34
) T to select “SEARCH”
then press the Cursor buttons (2 1
2 1
2 1
2 1
2 1
) T to start the
Manual Tuning.
6
If the desired TV station has not been tuned, press the
Cursor buttons (2 1
2 1
2 1
2 1
2 1
) T again.
≥
Press the MENU button V and repeat steps 3–5 for
each programme position you want to tune to a station.
7
Press the MENU button V three times to exit the On
Screen Display.
Direct Tuning Procedure
1
Press the MENU button V to display the Main menu on
the TV screen.
2
Press the Cursor buttons (34
34
34
34
34
) T to select “TUNER
PRESET” then press the ENTER button U.
3
Press the Cursor buttons (34
34
34
34
34
) T to select “CH” then
select the channel number you want to tune by pressing
the Cursor buttons (2 1
2 1
2 1
2 1
2 1
) T.
4
Confirm that “CLEAR” is set to “OFF”.
5
Press the Cursor buttons (34
34
34
34
34
) T
to select “SEARCH”.
6
Press the Numeric buttons 2 to
enter the number of the desired
programme position.
For the 5A and 9A channels, input the following numbers:
90 for CH-5A, 91 for CH-9A. (Example for Australia.)
≥
For other channels that require tuning, repeat
steps 3–6.
7
Press the MENU button V twice to exit the On Screen
Display.
Fine Tuning Procedure
1
Press the MENU button V to display the Main menu on
the TV screen.
2
Press the Cursor buttons (34
34
34
34
34
) T to select “TUNER
PRESET” then press the ENTER button U.
3
Press the Cursor buttons (34
34
34
34
34
) T to select “CH” then
select the channel number you want to tune by pressing
the Cursor buttons (2 1
2 1
2 1
2 1
2 1
) T.
4
Press the Cursor buttons (34
34
34
34
34
) T to select “FINE” then
press the Cursor buttons (2 1
2 1
2 1
2 1
2 1
) T to start the Fine
Tuning.
≥
Press the ENTER button U to return the tuning to its
former state.
5
Press the MENU button V to exit the On Screen Display.
Blanking of Unused Programme Positions
1
Press the MENU button V to display the Main menu on
the TV screen.
2
Press the Cursor buttons (34
34
34
34
34
) T to select “TUNER
PRESET” then press the ENTER button U.
3
Press the Cursor buttons (34
34
34
34
34
) T to select “CH” then
select the channel number you want to tune by pressing
the Cursor buttons (2 1
2 1
2 1
2 1
2 1
) T.
4
Press the Cursor buttons (34
34
34
34
34
) T to select “CLEAR”
then press the Cursor buttons (2 1
2 1
2 1
2 1
2 1
) T to select “ON”.
≥
Repeat steps 3– 4 for other unused programme
positions to skip during the selection of programme
positions.
≥
To cancel the blanking of a programme position select
that programme position then select “CLEAR” is “OFF”.
5
Press the MENU button V twice to exit the On Screen
Display.
CH 2
SEARCH µ
END: MENU
CH 2
∂/µ: END: MENU
SEARCH 74
∂/µ: END: MENU
CH2 AFC: ENTER
FINE µ
On Screen Display
CH 1
CLEAR
(OFF)
COUNTRY
(AUSTRALIA)
AUTO TUNE
SEARCH
(90)
FINE
END :MENU
SELECT:
TUNER PRESET