Other features, Energy saver/interrupt, Energy saver mode – Panasonic DP-2500 User Manual
Page 32: Auto off mode, Interrupt mode, Energy saver interrupt, Energy saver key interrupt key
32
CONTRAST
LCD
REDIAL /
PAUSE
LINE
SELECT
FLASH/
SUB-ADDR
SET
ORIGINAL
COPY
SIZE
SIZE
A5
A4
A4
FLS
B4
A3
MONITOR
RESET
START
START
1
2
3
4
5
6
7
8
9
0
PQRS
GHI
TUV
JKL
ABC
WXYZ
MNO
DEF
STOP
ON LINE
ON LINE
DATA
FAX
INTERNET
PRINTER
MULTI-SIZE
FEED
SORT
ALARM
ACTIVE
CLEAR
ENERGY SAVER
DP-3000
INTERRUPT
FUNCTION
COPY
ADD TONER
MON. VOL.
Energy Saver/Interrupt
NOTE
ENERGY SAVER Key INTERRUPT Key
■
This mode can save power while the copier is not in
use.
Energy Saver Mode
#
To enter this mode
Press the ENERGY SAVER key, the indicator will
flash.
$
To cancel this mode and make copies
Press the ENERGY SAVER key again.
Auto Off Mode
*
#
Automatically enters after 60 minutes from the last
copy. The Copier power will drop and the indicator
will light.
$
To make copies, press the ENERGY SAVER key.
Interrupt Mode
C
This mode can interrupt other copy jobs while
making copies.
#
Touch the INTERRUPT key, the indicator will light.
$
Make another copy job.
%
Touch the INTERRUPT key again to continue the
original job.
Note: The ADF/iADF can not be used with interrupt.
(Use only the Platen)
C
Energy saver time (15 minutes) and Auto off time (60 minutes) can be changed by the
key operator. (See page 39)
Other Features
Modes
Power Consumption
Warm Up Time
Normal Operation
Energy Saver Mode
Auto Off Mode
Approximately150 Wh
Approximately 45 Wh
Approximately 2.9 Wh
N/A
30 sec. recovery
35 sec. recovery (DP-2500)
45 sec. recovery (DP-3000)
∗
Sleep Mode will not activate if the file for the Overlay mode has been stored in
memory. (See page 30)
ENERGY SAVER
INTERRUPT