beautypg.com

Audio adjustments – Pioneer MULTI-CD CONTROL DSP HIGH POWER CD/MD PLAYER WITH FM/AM TUNER FH-P8900MD User Manual

Page 40

background image

Audio Adjustments

3. Turn the ignition switch to ON or ACC.

If the car’s air conditioner or heater is turned
on, turn it off. Noise from the fan in the air
conditioner or heater may prevent correct
auto-equalizing.
• Press (up or down) SOURCE to turn the

source on if this product is turned off.

4. Select the position for the seat on which

the microphone is placed.

Refer to “Using position selector” on page
34.
• If no position is selected before you start

auto-equalizing, “FL” is selected automati-
cally.

5. Press (up or down) SOURCE to turn the

source off.

6. Press and hold

2 to enter the auto-

equalizer measurement mode.

The front panel opens automatically.
• When the source is off, you can check the

location of “

2” by turnig on the feature

demo.

• You can also enter the auto-equalizer

measurement mode by pressing and hold-
ing AUDIO on the remote controller.

7. Plug the microphone into the microphone

input jack on this product.

8. Press A.EQ to start the auto-equalizing.

9. Get out of the car and close the door

within 10 seconds when the 10-second
count-down starts.

The measurement tone (noise) is output
from the speakers, and auto-equalizing
(acoustic characteristics measurement and
compensation) begins.
• When all speakers are connected, auto-

equalizing is completed in about four min-
utes.

• To cancel auto-equalizing part way

through, press any button.

10.When auto-equalizing is completed,

“Complete” is displayed.

When correct measurement of car interior
acoustic characteristics is not possible, an
error message is displayed. (Refer to
“Understanding auto-equalizing error mes-
sages” on page 48.)

11.Press any button to cancel the auto-

equalizer mode.

12.Store the microphone carefully in the

glove compartment.

Store the microphone carefully in the glove
compartment or other safe place. If the
microphone is subjected to direct sunlight for
an extended period, high temperatures may
cause distortion, color change or malfunc-
tion.

39