Pioneer MULTI-CD CONTROL DSP HIGH POWER CD/MD PLAYER WITH FM/AM TUNER FH-P8900MD - Manual (Page 13)

D
isplay and indicators
FORM 1
FORM 2
q Band
w LOC indicator
e Preset number
r Frequency
t Stereo indicator
B
asic operation
Reset the AM tuning step from 9 kHz (the facto-
ry preset step) to 10 kHz when using the tuner
in North, Central or South America. (Refer to
page 41.)
1. Press (up or down) SOURCE to select the
tuner.
Press (up or down) SOURCE until “Tuner”
appears.
2. Press (up or down) VOLUME to adjust the
volume.
3. Press BAND to select the desired band.
Press BAND repeatedly to switch between
the following bands:
FM-1
=
FM-2
=
FM-3
=
AM
4. Press
2
or
3
to tune in to a station.
The frequencies move up or down step by
step.
• If you press and hold
2
or
3
for about one
second and release, you can perform seek
tuning. Seek tuning lets you skip broad-
casting stations until a broadcast strong
enough for good reception is found.
• If you press and hold
2
or
3
, you can skip
broadcasting stations. Seek tuning starts
as soon as you release the button.
Note:
• The stereo indicator “” lights when a stereo sta-
tion is selected.
q w e
r
t
q w e
t r
12
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
Tuner