Pioneer PDV-LC20 - Manual (Page 32)

03 Advanced Features
32
En
5 If you want to save the program
list, move the cursor down (
∞)
to Program Memory and set it
to On.
If you do this, the program list is auto-
matically recalled when you next load the
disc.
• You can save program lists for up to 24
discs.
6 Press ENTER or
3 to start
playback immediately, or
PROGRAM to exit if you want to
start playback later.
Note
During program play, you may occasionally
see the start of a chapter that was not
programmed when the chapter number
changes. This is not a malfunction.
For Video CDs that feature PBC, make sure
that the disc is stopped before you start.
1 Press PROGRAM.
2 Enter the track numbers for
your program list.
For tracks 1–9, use the corresponding
number buttons. For 10 and over, use the
+10 button (+10, 0 for 10; +10, +10, 4
for 24, etc.)
• You can program a pause instead of a
track: press
8 instead of entering a
number in the program list. (A pause
can't be the first or last step in the list.)
• A program list can contain up to 24
steps.
3 Press ENTER or
3 to start
playback immediately, or
PROGRAM to exit if you want to
start playback later.
• You can't start playback later with a
PBC Video CD; press ENTER or
3 to
start.