POLAR S510 - Manual (Page 24)

C 45 C 44
3. Start from the Time of day display by pressing the OK to start measuring
your heart rate. A heart symbol will start flashing and your heart rate in
beats per minute will appear in max. 15 seconds. You have now entered
to the Measure mode. The receiver returns automatically to the Time of
day display within 5 minutes if there is no heart rate reception.
The following display appears as you enter the Measure mode. You can
change this display to Stopwatch display by pressing the up or down button.
Exercise name
Time of day
Current heart rate
Exercise set in use or
BasicUse
The following displays start to alternate, if you have bike 1 or 2 on, as you
enter the Measure mode.
Exercise name Bike name
Time of day.
Current heart rate.
Exercise set in
use or BasicUse.
Bike in use.
4. If you want to record cycling information, keep the bike still until your
heart rate appears on the display. Press OK to start recording your exercise.
Or
If you want to record cycling information without heart rate measurement:
after the heart rate reading 00 appears press OK and start cycling.
If your preset exercise requires cycling settings Set bike is displayed for a
few seconds. In order to start the exercise set you need to select bike 1 or 2
by pressing and holding the down button.
Speed,
cadence and
autostart;
underline indicates
that function is set on.
Manual S510 GBR C.pm6 8.3.2001, 12:44 44-45