POLAR S510 - Manual (Page 18)

B 33 B 32
Bicycle feature settings
1. In the Time of day display scroll up or down until OPTIONS is displayed.
2. Press OK to enter the Options mode. EXERCISE SET is displayed.
3. Scroll up or down until BIKE SET is displayed.
4. Press OK to start the bike settings.
5. Scroll up or down to start setting the Bike 1 or 2 or turn the bike
features off. Press OK. If you selected bike features off skip the rest of
the bike settings.
You can set two bike preferences for the S510. Make the settings ready for
both bikes; when you start exercising, just select bike 1 or 2. As you take
the bike settings 1 or 2 in use your speed and distance measuring functions
are always on. Before you can use the Polar S510 to measure distance,
speed and cadence* information, you should adjust the wheel size
information of your bike.
Options
Bike Set
Bike 1/ Bike 2/ Bike OFF
Wheel Cadence On/OFF AutoStrt On/OFF
Fitness test on/off
If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until Fit. Test is displayed.
6. Press OK to start setting the fitness test. On/OFF starts to flash.
7. Scroll up or down to set the fitness test on or off. Press OK.
Predicted maximum heart rate on/off (HR
max
-p)
If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until HRmax-p is displayed.
6. Press OK to start setting the HR
max
-p. On/OFF starts to flash.
7. Scroll up or down to set the HR
max
-p on or off. Press OK.
HR
max
-p can be turned on only if Polar Fitness Test is on.
To continue your settings, press the stop button or to return to the Time of
day display, press and hold the stop button.
* Optional Polar Cadence Sensor required.
Manual S510 GBR C.pm6 8.3.2001, 12:44 32-33