Panasonic NV-FJ630AM - Manual (Page 12)

12
Option Setting
1 Press the MENU button U to display
the Main menu on the TV screen.
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
SYSTEM
OPTION
MENU
SELECT
END : , OK
:MENU
DELETE NAVIDATA: To delete all the Jet Navigator
data stored in the VCR’s memory.
– Press the Cursor buttons (21) S to select [OK] then
press the OK button T to do the deletion.
NO: Initially set at this position.
END: It is done to delete all the Jet Navigator data.
OSD REC: To set to the conditions for the
OSD Recording function.
– Press the Cursor buttons (21) S to select [ON] or
[OFF].
OFF: Initially set at this position.
ON: This setting enables OSD Recording.
(See page 15.)
If you select [ON], [JET NAVIGATOR] is set to
[OFF] automatically.
DIRECT REC: To set to the conditions for Direct
TV Recording Function.
– Press the Cursor buttons (21) S to select [ON] or
[OFF].
OFF: Initially set at this position.
ON: This setting enables Direct TV Recording.
AV Input becomes exclusive channel for Direct
TV Recording.
(See page 16.)
4 Press the MENU button U twice to exit the On Screen
Display.
END :MENU
TAPE SELECT [ AUTO]
NTSC INPUT SELECT [ AUTO]
NTSC PB SELECT [ onPALTV]
JET NAVIGATOR [ OFF]
DELETE NAVIDATA [ NO]
OSD REC [ OFF]
DIRECT REC [ OFF]
SELECT:
OPTION
On Screen Display
2 Press the Cursor buttons (34) S
to select [OPTION] then press the
OK button
T.
3 Press the Cursor buttons (34) S
to select the desired field.
TAPE SELECT: To select the corresponding video
cassette tape length to display the
approximate remaining tape time.
– Press the Cursor buttons (21) S to select the
corresponding video cassette tape length.
AUTO: The VCR automatically distinguishes E30, -60,
-90, -120, -180 and -240 tapes.
E195: For E195 tape
E260: For E260 tape
E300: For E300 tape
– The remaining tape time may not be displayed correctly
depending on the tape used.
NTSC INPUT SELECT: To select the colour TV system
used to record NTSC signals.
– Press the Cursor buttons (21) S to select [AUTO].
Allows NTSC [4.43] or [3.58] signals to be distinguished
automatically.
– If the tape has not recorded correctly, select 4.43 or
3.58.
4.43:
When recording NTSC 4.43 signals.
3.58: When recording NTSC 3.58 signals.
Some programmes on NTSC 3.58 system
cannot be recorded correctly at this position.
NTSC PB SELECT: To select the colour TV system of
the TV used to play back a tape
recording NTSC signals.
– Press the Cursor buttons (21) S to select the desired
position according to the colour TV system of the TV.
on PAL TV: For TVs that can receive PAL signals.
4.43:
For TVs that can receive NTSC 4.43
signals.
3.58: For TVs that can receive NTSC 3.58
signals.
JET NAVIGATOR: To set to the conditions for the Jet
Navigator Function.
– Press the Cursor buttons (21) S to select [ON] or
[OFF].
OFF: Initially set at this position.
ON: [ ] appears on the VCR display and Jet
Navigator function works.
If you select [ON], [OSD REC] is set to [OFF]
automatically.